"New RUSTGO Model 195 Counter Weight Systems"
"New RUSTGO Model 139 Counter Weight Systems"
The "Red Bracket" is for carrying the Intermediate Levels on the RUSTGO Model 139.
"Main Platform & Intermediate Level Self- Closing Entry Gates"
"New Ladder Extension for Both Main & 6' Extension Ladder"
This New Safety Ladder Extension System is designed to extend the ladder to the top of the Main Platform Handrail when the Main Platform is at its maximum on either the Main Up-Rights or when the 6' Extensions are in place. Please observe the photographs for an example of this New Safety Feature. This gives the workman a full access ladder from the ground until they are in the standing position on the Main Platform. This is another OSHA Safety Requirement and a Canadian Safety Requirement for both Models 139 and 195 RUSTGO All-Terrain Manual Mobile Work Platform.
This is a New Safety feature that allows a workman to be safely tied off when working over 6' off the ground. These tie off points are welded to the inside area of the Main Up-Rights and 6' Extension Up-Rights. These Safety Lanyard Tie-Off Positions gives a workman the ability to tie-off from a Safety Body Harness Lanyard or a Retractable Lanyard without any conflicts or issues while working off any of the RUSTGO Platforms. This is a Safety OSHA Compliance Requirement and a Canadian Safety Compliance Requirement for both Models 139 and 195 RUSTGO All-Terrain Manual Mobile Work Platforms.
"New Safety Lanyard Personnel Tie-Off System"
RUSTGO News and Safety Upgrades
Toll Free: 1-800- 448- 4077 Cell: 205- 238- 8615 Email: williamking@rustgousa.com
" Drop Leg for RUSTGO Units"
The Entry Gates are now spring loaded and self closing on all platform levels. This means that when someone enters the platform and clears the gate opening the gate will automatically close behind the person. This is a safety feature for all platform entry gates on all levels. This is a Safety OSHA Compliance Requirement and a Canadian Safety Requirement for both Models 139 and 195 RUSTGO All-Terrain Manual Mobile Work Platforms and Intermediate Levels.
Drop Legs are required by Canadian Safety Standards! These Drop Legs are required to be on all Canadian RUSTGO Units. The Drop Legs are positioned just behind each wheel and tire assembly on the Model 139 & 195 RUSTGO Units. The reason for these Drop Legs is to support a RUSTGO Unit in the event there is a flat tire or a sudden loss of air in a tire.
This feature is a Canadian Safety Requirement!
This feature is not a OSHA Safety Requirement in the USA!
This photograph shows a RUSTGO Model 195 Axle fully extended with the New Style RUSTGO Counter Weight System.
Hours: Monday - Friday: 7:00am - 5:00pm Saturday - Sunday: After Hours til 9 pm Central
Website Designed By: Caridad Stephens Photography and Designs
PH: 205-639-3997 Email: caridadmstephens@hotmail.com
Also Like Us on Facebook: Caridad Stephens Photography